One of the most important aspects of maintaining a woodburning stove is ensuring that the rope seals around the stove door are in good condition. Over time, these seals can wear out and become less effective, leading to a range of problems including sooting and increased fuel consumption. In this blog, we'll take a closer look at the importance of stove door rope, how to tell if your seals need replacing, and how to go about replacing them.
Why are Stove Door Rope Seals Important?
When you light a fire in your woodburning stove, the heat causes the metal to expand. This expansion can lead to gaps between the stove door and the rest of the stove, allowing air to enter and escape. This can lead to a range of problems, including sooting up of the glass, decreased fuel efficiency, and even the risk of carbon monoxide poisoning. Stove door rope seals help to prevent this problem by creating an airtight seal between the stove door and body.
How to Tell if Your Rope Seals Need Replacing?
If your woodburning stove glass is turning black or your fuel consumption has increased, it's likely that your rope door seals need replacing. Another sign to look out for is a loose stove door that doesn't close properly. You should also inspect the rope seals regularly for signs of wear and tear, including fraying or flattening of the seal. If in doubt, it's always best to get a professional to take a look.
How to Replace Rope Seals on Your Stove Door
Replacing rope seals on your stove door is a fairly simple process that can be done in a few easy steps. Here's how:
Step 1 - Remove Old Rope
The first step is to remove the old rope seal from around the door. Use a pair of pliers to pull the seal away from the door, making sure to remove it completely.
Step 2 - Clean the Door
Next, clean the door and surrounding area thoroughly using a wire brush, making sure to remove any debris or old rope fibres. This will ensure that the new rope seal adheres properly.
Step 3 - Measure and Cut the New Rope
Measure the length of the rope seal required for your door, and then cut the new rope to size. Make sure that the rope is the correct thickness for your stove model.
Step 4 - Apply Adhesive
Apply a heat-resistant adhesive to the door, making sure to cover the entire area where the rope will be attached.
Step 5 - Attach the New Rope Seal
Finally, attach the new rope seal to the door by pressing it firmly into the adhesive. Make sure that the rope is evenly spaced and that there are no gaps between the rope and the door. Use a pair of scissors to trim any excess rope.
In Conclusion
Replacing rope seals on your stove door is an important part of maintaining your woodburning stove, and can help to prevent a range of problems including increased fuel consumption and the risk of carbon monoxide poisoning. If you're unsure about the process or prefer to leave it to the professionals, contact The Stove House on T. 01730 810931 (brand name removed) for log burner servicing, repairs and rope seal replacements. With the right care and attention, your woodburning stove can provide years of reliable heating and enjoyment.