Replacing the fire rope wood burner door gaskets on your outdoor wood burner is essential for proper and efficient operation. Over time, the gaskets may become worn or damaged, allowing air to enter the unit and decreasing its efficiency. In this guide, we will show you how to replace door gaskets on your outdoor wood burner, allowing you to maintain optimal heat output and energy efficiency.
Step 1: Turn Off the Burner
Before you begin, make sure that the outdoor wood burner is turned off and has completely cooled down. This will ensure your safety and prevent any accidents from occurring.
Step 2: Inspect the Gaskets
Once the burner has cooled down, inspect the door gaskets for any signs of wear or damage. If the gasket is worn or flattened out, it may need to be replaced. If the gasket is cracked or torn, it definitely needs to be replaced.
Step 3: Remove the Old Gaskets
Using a flathead screwdriver, carefully pry the old gasket out of the channel on the door. Work your way around the door, removing the gasket completely. Be sure to remove any leftover adhesive or debris from the channel before proceeding.
Step 4: Apply the New Gaskets
Cut the new gasket to the appropriate length using a pair of sharp scissors. Apply a small amount of high-temperature adhesive to one end of the gasket and press it firmly into the channel on the door. Continue applying adhesive and pressing the gasket into the channel until you reach the end.
Step 5: Let the Adhesive Dry
Once the new gasket is in place, let the adhesive dry completely before closing the door. This usually takes about 24 hours, so be patient and wait for the adhesive to cure before using the wood burner again.
Conclusion
Replacing the door gaskets on your outdoor wood burner is a simple and straightforward process that can greatly improve the efficiency of your unit. By following the steps outlined above, you can easily replace the gaskets and get back to enjoying the warmth and comfort of your wood burner. Remember to always observe safety precautions when working with wood burners, and never attempt repairs or maintenance while the unit is still hot.